Broach:
A
broach is a multi point cutting tool having a series of cutting teeth
or edges which gradually increase in size from the starting or entering
end to the rear end. Broaches are used for machining either external or
internal surfaces. These surfaces may be produced flat or circular. In
broaching, the broach is pushed or pulled over or through a surface of
work piece, Each tooth of the tool. A thin slice from surface broaching
of inside surface is called internal or hole broaching and outside
surfaces is called surface broaching.
Detail of an internal or hole broach:
A typical broach is shown in figure.
It
is used to machine an internal hole. The broach is gripped by puller at
the shank end. The front rake angle refers a rake angle of a single
point cutting tool and back of the angle (relief angle) is provided to
prevent rubbing of the tool with the work piece.
High
speed steel (Hss) material is widely used to make the broach. It is
also raised carbide of disposable inserts or sometime used for cutting
edges then machining cost iron parts, which requires close tolerance.
Carbide tools are also used to an advantage on steel cutting. A broach
may be either assembled or built up form shells.
Other Recommended Mobile Phones:- Less Than 5000
Less Than 5000 - 10,000
Less Than 15000
Less than 30000
More Then products
Recommended Earphones Under 999
Top Smartphone of 2017
My YouTube Gears -
No comments:
Post a Comment