A3 Flight Controller
Equipped
with DJI's advanced A3 Flight Controller, the MG-1S is capable of high
levels of reliability. Its algorithm has been optimized for agricultural
utilizations, ensuring stable flight even with sloshing liquids. In addition, the redundant design of the A3 includes dual compasses. If an error occurs in one sensor, the system will automatically switch to the other sensor to continue safe, reliable flight.
Radar Sensing
Three high-precision, microwave radars are placed on the front slope, rear slope and the bottom of the spray tank. Radars on front and rear
slopes detect the terrain, allowing the aircraft to adjust its height
approximately. The downward radar then provides high-precision height.
As the radars scan, the MG-1S is able to perceive the change of terrain,
adjust its altitude and maintain its altitude above the crops.
Forward Obstacle Sensing
Spraying Stops When Crossing
Puls Spraying
Level 1 Spraying
Level 2 Spraying
Precision Spraying
A
new spraying system enables more accurate spraying. With two compatible
pumps controlling the front pair and rear pair of nozzles separately, there
are now three spraying modes available: forward spraying, backward
spraying and full spraying. The new pressure sensor and flow sensor
monitor the spraying rate in real-time, realizing dynamic control over
spray speed and amount during operation. Nozzles with extended spray
booms have been used to make better use of downward airflows. This spraying system now responds more accurately to commands, adding accuracy and effectiveness to spraying operations.
MG INTELLIGENT OPERATION PLANNING SYSTEM
Plan
and edit flight paths intelligently with the MG-1S. When you set the
liquid amount for per area, the aircraft will calculate the remaining
parameters for you, enhancing convenience. You can also choose between
Efficient Mode and Intensive Spraying Mode for different operation
needs.
Professional Controller
The
MG-1S controller includes a bright 5.5 inch/1080p display that is
visible even under strong sunlight. With a built-in operation planning
system, users can use the controller to increase working efficiency. The
battery of controller supports a working time up to 5 hours, enabling
long-time outdoor operations.* Data shown in the picture beside is for reference only. Data shown in real operation shall prevail.
Bright Display Screen
Operation Planning System
5-hour Working Time
No comments:
Post a Comment