Monday 25 June 2018

Phantom 4Pro Visionary Intelligence

Phantom 4Pro
Visionary Intelligence













DJI – Introducing Phantom 4 Pro








Quieter Flight and Updated Transmission System

  • 4dB Noise Reduction
  • OcuSync

Camera with 1-inch 20MP Sensor

The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed. In effect, it is as powerful as many traditional ground cameras. More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.

5-Direction of Obstacle Sensing

FlightAutonomy is expanded with an additional set of high-resolution stereo vision sensors placed at the rear in addition to the pair placed at the front as well as infrared sensing systems placed on the left and right sides. This network creates a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance, protecting the Phantom 4 Pro from more obstacles and giving filmmakers the confidence to capture more complex images.

Remote Controller with Built-in Screen

A 5.5in 1080p screen integrated with the Phantom 4 Pro + offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. As the DJI GO app is built into the screen, hardware and software can be fully optimized, allowing you to edit and share instantly. A five-hour battery life makes the Phantom 4 Pro + a complete aerial imaging solution. The integrated upgraded Lightbridge HD video transmission system supports dual frequencies for greater interference resistance and a maximum video transmission range of 4.3mi (7km)*.
*Unobstructed, free of interference, when FCC compliant.
Draw is a brand new technology for waypoint control. Simply draw a route on screen and the Phantom 4 Pro will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios.

Forward: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.

Phantom comparison

AIRCRAFT


Product PositionEntry-Level Professional Drone with Powerful Obstacle AvoidanceEntry-Level Professional DroneEntry-Level Drone
Weight (Battery & Propellers Included)1388 g1368 g1236 g
Max Flight TimeApprox. 30 minutesApprox. 30 minutesApprox. 25 minutes
Vision SystemForward Vision SystemBackward Vision SystemDownward Vision SystemForward Vision SystemDownward Vision SystemDownward Vision System
Obstacle SensingFront & Rear Obstacle Avoidance Left & Right Infrared Obstacle AvoidanceFront Obstacle AvoidanceN/A
Camera Sensor1’’ CMOSEffective pixels: 20 M1’’ CMOSEffective pixels: 20 M1/2.3’’ CMOSEffective pixels: 12 M
Max. Video Recording Resolution4K 60P4K 60P4K 30P
Max Transmission DistanceFCC: 4.3 miFCC: 4.3 miFCC: 2.5 mi
Video Transmission SystemLightbridgeLightbridgeWi-Fi
Operating Frequency2.4 GHz/5.8 GHz *5.8 GHz transmission is not available in some regions due to local regulations.2.4 GHz2.4 GHz/5.8 GHz

*5.8 GHz transmission is not available in some regions due to local regulations.










No comments:

Post a Comment

Free sample product